MANUAL DE UTILIZARE Software CMS HiP2P Client
I. Instructiuni utilizare Software CMS HiP2P Client 1. Instructiuni de instalare 1.1 Cerinte minime hardware si software Serie Pentium IV, frecventa CPU >2.0GHz RAM > 2GB Hard Disk > 120 GB Rezolutie > 1024 x 768 Windows2000/ Windows XP (recomandat)/ Windows2003/ Windows Vista/ Windows7/8 1.2 Instalare Dublu click pe fisierul de instalare de pe CD-ul din pachet. Apare urmatoarea interfata: Alegeti calea de instalare si faceti click pe Next. Dupa finalizarea instalarii, urmatoarea iconita va aparea pe desktop: 2. Instructiuni utilizare software CMS 2.1 Autentificare 1
Nume utilizator implicit: admin Parola: lasati campul necompletat 2.2 Interfata CMS Interfata previzualizare Interfata redare inregistrari locale Interfata redare inregistrari stocate la distanta Interfata setari Interfata istoric Iesire din cont Iesire din CMS Buton zoom Selectie afisare canale: 1,4,6,8,9,16 Buton intercom Buton difuzor Buton inregistrare Ecran intreg Ascunde / Afiseaza lista mesaje alarma Buton preluare imagine (snapshot) 2
2.3 Administrare camere video 2.3.1 Adaugare camera Click buton Config pentru a adauga si a configura o camera. Adauga o zona Modifica numele zonei selectate Sterge zona selectata Adauga o camera manual Editeaza configurari camera selectata Sterge camera selectata Adauga camera video in zona selectata Cauta camera in retea Selecteaza toate camerele gasite in retea O camera poate fi adaugata in lista folosind cautarea in retea sau manual. Adaugare camera prin cautare in retea: Click buton Search. Software-ul va cauta toate camerele din retea. Selectati camera dorita si adaugati-o in lista facand click pe butonul Adaugare camera manual: Click pe butonul 3
[UID] fiecare camera are un cod UID unic [Name] Nume camera maxim 15 caractere [User name] Numele de utilizator al camerei (implicit este admin ) [Password] Parola camerei (implicit este admin ) [Area] Zona de afisare a camerei 2.4 Previzualizare imagini Dupa adaugarea si configurarea camerei, faceti click pe butonul Preview. Modul de afisare implicit este impartirea ecranului in 4. Software-ul suporta afisarea a maxim 36 de camere. Nicio camera nu a fost asociata acestui canal Buton Intercom Buton Difuzor Camera din canalul respectiv inregistreaza Pentru a previzualiza o camera faceti dublu click pe UID-ul sau pe numele camerei din Lista din partea stanga a ecranului sau faceti click pe UID si trageti in partea dreapta pentru previzualizare. Camera conectata Camera nu este conectata Camera inregistreaza 4
Click dreapta pe orice zona adaugata in Lista din partea stanga a ecranului. Apare imaginea de mai jos: [Connected All] Conecteaza toate camerele din zona selectata [Start manual record of area] Porneste inregistrarea manuala in zona selectata [Stop manual record of area] Opreste inregistrarea manuala in zona selectata [Auto adjust all] Camera regleaza automat proportiile imaginii [Full display all] Camera afiseaza imaginile pe toata suprafata segmentului selectat 2.5 PTZ Control 2.5.1 PTZ Control Folositi cele 8 taste directionale pentru a controla miscarile de rotatie ale camerei Largire diafragma Micsorare imagine Micsorare diafragma Focus pe plan apropiat Marire imagine Focus pe plan departat NOTA: Aceste setari sunt active doar pentru camerele cu lentile varifocale 5
2.5.2 Presetari Puteti preseta maxim 256 de configurari. Numarul de presetari depinde de modelul de camera video. 2.6 Administrare inregistrare 2.6.1 Planificare inregistrare Click pe butonul Config Click pe Record Management. Creati un plan conform imaginii de mai sus. SUN-SAT Zilele saptamanii 0-23 Orele zilei cu diviziuni de jumatate de ora [General record length] Lungimea implicita a inregistrarilor video este de 5 minute. Valorile care pot fi setate sunt cuprinse intre 1 minut si 30 de minute. [Remaining disks recycling space] Spatul rezervat pe disc pentru inregistrarile video poate fi setat intre 1GB - 50GB. Cand spatiul ramas liber este mai mic decat cel setat, fisierele vor fi inregistrate pe urmatorul disc sau vor fi sterse inregistrarile mai vechi pentru a crea spatiu. Valoarea implicita: 20GB. [Record format] Disponibile doua valori: H264 si AVI [No hard disk space coverage] Click Yes - daca spatiul ramas este insuficient, vor fi sterse inregistrarile mai vechi. Click No - daca spatiul ramas este insuficient, camera nu va mai inregistra. 6
[Record path] Software-ul CMS va testa hard disk-ul si va afisa partitiile. Calea implicita pentru inregistrarile video este partitia D. 2.6.2 Inregistrare manuala Selectati fereastra, apoi click pe sau click dreapta si alegeti Record. Verificati planul de inregistrare creat anterior si calea de stocare a inregistrarilor. Camera inregistreaza conform planului de inregistrare presetat Camera inregistreaza manual 2.7 Redare inregistrari locale Buton redare inregistrare Buton stop redare inregistrare Buton redare inregistrare secventa cu secventa Buton preluare imagine instantanee (snapshot) Buton marire imagine. Folositi mouse-ul pentru delimitarea zonei in care doriti zoom Buton ecran intreg Selectie viteza redare Buton difuzor. Click daca doriti redare inregistrare cu sunet 2.7.1 Redare inregistrari folosind cautarea dupa un anumit interval de timp 7
2.7.2 Redare inregistrari folosind cautarea dupa fisier Selectati canalul, data si intervalul orar: 2.8 Redare inregistrari stocate pe cardul micro SD Puteti reda inregistrarile de pe cardul microsd. Selectati canalul, data si intervalul orar. Pentru a reda, dispozitivul pe care s-au stocat inregistrarile trebuie sa fie conectat. 2.9 Setare parametri Click pe butonul Config Selectati Parameter settings 2.9.1 Parametri Video Video coding: setati frecventa si codare video Video parameters: setati rezolutia video, tip flux, bit rate, cadre pe secunda, calitate imagine etc. OSD setting: setati nume OSD 8
2.9.2 Parametri imagine WDR: ON sau OFF. Implicit este OFF Exposure mode: Setati expunerea pe Auto / Indoor (Interior) / Outdoor (Exterior). Implicit este Auto. Image priority mode: Mod prioritate imagine. Puteti selecta prioritate iluminare sau prioritate secventa IR Control: Control Infrarosu. Puteti selecta Auto / On / Off. Implicit IR este ON (imagine alb-negru), IR Off (imagine color) 2.9.3 Parametri audio Stream type: Tip flux. Alegeti flux principal sau flux secundar Capture audio: Captare audio. ON sau OFF. Implicit este OFF Audio format: G.711 sau G.726 Audio input: Microfon. Volumul de intrare si de iesire este intre 80 si 95 9
2.9.4 Setari alarma Detectie miscare Sensibilitate: scazuta - 25, medie - 50 sau mare - 75 Sunet alarma Sunet alarma ON sau OFF Volumul - setati valori intre 1-100. Implicit este 50 NOTA: doar unele camere suporta aceasta functie Alarma externa Alarma externa ON sau OFF; functie suportata doar de camerele cu intrare si iesire pentru alarma Alarm Linkage Puteti seta: Trimitere imagini alarma prin email Salveaza imagini pe server FTP Salveaza inregistrare video pe server FTP Salveaza imagini pe card microsd Salveaza inregistrari video pe card microsd Numar imagini capturate: setati de la 1 la 3 10
Programare alarma SUN-SAT Zilele saptamanii 0-23 Orele zilei cu diviziuni de jumatate de ora 2.9.5 Setari retea Network setting Introduceti parametrii de retea RTSP port Setati portul RTSP sau alegeti verificare RTSP ONVIF Setati parametrii ONVIF ONVIF ON sau OFF, setari parametri imagine etc. 11
2.9.6 Card SD Setati un plan de inregistrare Tip flux: flux principal sau secundar Lungime inregistrare: setati valori intre 15-900 secunde. Valoare implicita 600 secunde. Formatare card SD 2.9.7 Captura imagine Bifati Salveaza imagini pe card SD. Daca setati intervalul la 60 de secunde, atunci, la fiecare 60 de secunde va fi salvata o imagine pe card. Bifati Salvati imagini pe server FTP Daca setati intervalul la 60 de secunde, atunci, la fiecare 60 de secunde va fi salvata o imagine pe server 2.9.8 PTZ Puteti seta protocolul, control PTZ, viteza PTZ, baud rate etc. NOTA: nu toate camerele video suporta functia PTZ 12
2.9.9 Informatii autentificare Puteti modifica parola de autentificare 2.9.10 Sistem Sincronizare cu ora din retea Setati server NTP, fus orar etc. Informatii dispozitiv Se pot obtine informatii despre dispozitiv: nume, versiune software, adresa IP etc. 2.9.11 WiFi Pasul 1: Activati WiFi, click cauta semnal WiFi Pasul 2: Dublu click pe SSID al retelei WiFi folosita Pasul 3: Introduceti parola WiFi Pasul 4: Click buton WiFi Check 13
2.10 Administrare utilizatori Implicit utilizatorul administrator este admin, fara parola. Dupa ce v-ati autentificat ca administrator, puteti adauga sau sterge alti utilizatori. Sunt trei tipuri de utilizatori: admin, user si guest cu drepturi diferite. Click butonul Config Click User management Din aceasta interfata puteti adauga utilizatori, sterge utilizatori sau modifica drepturi sau parola utilizatori. 2.11 Alte setari [Connection timeout] poate fi setat intre 5-60 secunde [Log retention time] in intervalul setat (o luna, doua luni, trei luni, sase luni) istoricul sistemului nu poate fi sters [Snapshot format] format imagine captura: JPG sau BMP [Image snapshot path] calea unde vor fi salvate capturile [Booting the system automatically run program] cand se deschide Windows, software-ul CMS porneste automat [Single screen number] ecranul poate fi impartit in 16, 25 sau 36 de imagini [Display mode] Direct Draw, Direct 3D 14
[Password] parola implicita pentru adaugare dispozitiv [Export parameters] exporta toti parametrii din CMS intr-o copie de rezerva [Import parameters] importa toti parametrii dintr-un alt CMS. Cele doua versiuni de CMS trebuie sa fie identice. [Rebuild video index] sterge si reface video database index file 2.12 Istoric [All logs] Inregistreaza toate informatiile din sistem [System log] Inregistreaza autentificare/deconectare utilizatori, configurare utilizatori etc. [Operation log] Inregistreaza toate operatiunile efectuate de un utilizator [Alarm log] Inregistreaza informatii alarma dispozitiv 15
Software CMS HiP2P Client USER MANUAL 16
I. Usage instructions Software CMS HiP2P Client 1. Installation instructions 1.1 Installation requirements Pentium IV, frequency CPU >2.0GHz RAM > 2GB Hard Disk > 120 GB Resolution > 1024 x 768 Windows2000/ Windows XP (recomended)/ Windows2003/ Windows Vista/ Windows7/8 1.2 Installation Double-click the installation package, it will pop up below interface: Select the installation path, click Next, then installation finished. After installation, it will show below icon on desktop: 2. CMS software intruction 2.1 Login 17
Default user name: admin Password: no password 2.2 CMS interface Preview Local playback Recording playback Settings Log Logout Exit CMS Zoom Display: 1,4,6,8,9,16 Intercom Speaker Recording Full screen Hide / Show lista alarma messages Snapshot 18
2.3 Devices management 2.3.1 Add device Click Config to add and configure a device. Add area Modify area Delete selected area Manualy add device Modify selected device Delete selected device Add the searched devices to selected area Search the devices in LAN Search the devices in LAN You can add a device manually or using search function. Search to add device in LAN: Click Search button. The software will search all the devices in that network. Select a device and add it to the List by clicking Add device manually: Click 19
[UID] each device has a unic UID [Name] Device name, can be self-defined, max 15 characters [User name] User name of the device, default is admin [Password] Login password of the device, default is admin [Area] displaying area of the device 2.4 Image preview After configured device, clicking preview button in Tab bar. The maximum image segmentation is optional, has 16/25/36 image mode. Higher the picture number, the performance of host also need to be promoted. Intercom Speaker this channel do not connect any device The device is recording Double click the Device UID or name in List mode, or drag UID to window, it will display images. Device connected Device not connected this channel is recording 20
Right click any area, will popup below picture: [Connected All] Connect devices in selected area [Start manual record of area] Open manual record in selected area [Stop manual record of area] stop manual record in selected area [Auto adjust all] he device adjust image display ratio automatically in select area [Full display all] the device display images in select area as the size of segmentation picture 2.5 PTZ Control 2.5.1 PTZ Control You can control PTZ of eight directions rotation by direction key Iris enlarge button Zoom out button Iris shrink button Focus in button Zoom in button Focus out button 21
2.5.2 Preset setting The CMS can support Max 256 preset points. For how many preset points can be used in the concrete, please check the preset quantity instruction that camera supported. 2.6 Record management 2.6.1 Plan of record Click Config Click Record Management. Create a plan as in the image above. SUN-SAT means one week, based on the count of day 0-23 means one day, based on the unit of half an hour. [General record length] The default record length is 5 minutes in system setting for a single recording file. The file can set 1-30minutes. [Remaining disks recycling space] The scope is 1G-50G optional, when disk space is less than set range, it will skip to another disk or delete earliest record file(default recycling is 20GB) [Record format] Disponibile doua valori: H264 and AVI record formats [No hard disk space coverage] Select Yes, when all disk space is less than the set of disk space, it will delete the earliest record. Select No, when all space is less than the set of disk space, it will stop recording. 22
[Record path] After installed CMS, CMS will test the hard disk in device automatically, and display in the list, default to D disk. 2.6.2 Manual recording Firstly select window, then click button or right-click window to choose record. Please check plan of record to see record length and path setting. it means this channels is recording according to the plan it means the channel is recording manually 2.7 Local playback Recording play button Stop playing button Single frame play button, when play recording, click it to single frame play Image snapshot button, choose play window, click it to snapshot images to disk. Electronic zoom in button, select the button in the process of play recording then draw the magnified image region in the window. Full screen button Select play speed Voice button, you can choose whether open voice during playing record default is closed. 2.7.1 Record playback retrieval 23
2.7.2 Record playback Select channel, date and time: 2.8 Record playback from micro SD card It can remote playback the timing record or alarm record in SD card, select the playback channel, date, start and end time. 2.9 Parameter settings Click Config Select Parameter settings 2.9.1 Video parameters Video coding: can set frequency, video coding Video parameters: can set video resolution, stream type, code rate, frame, main frame interval, video coding control and coding quality OSD setting: can set OSD name, OSD time 24
2.9.2 Image parameters WDR: choose the box in front of WDR, means WDR on, default is off Exposure mode: can set auto, indoor, outdoor; default is auto Image priority mode: can set illumination priority, frame priority IR Control: can set auto, on, off; default IR on is black white mode; IR off is color mode 2.9.3 Audio parameters Stream type: can choose main stream or second stream Capture audio: on or off, default is off Audio format: G.711 or G.726 Audio input: Microphone input. Input volume and output volume is 80 and 95. 25
2.9.4 Alarm settings Motion detection on or off Sensitivity: can choose low, medium, high; low sensitivity is 25; medium sensitivity is 50, high sensitivity is 75. Sound alarm can set sound alarm on or off, volume scope can be set 1-100, default is 50 Note: only some cameras can support this function. External Alarm can set external alarm on or off; only support the cameras with alarm input output Alarm Linkage Can set: Email alarm and sending alarm pictures Save pictures to FTP server Save videos to FTP server Save pictures to SD card Save videos to SD card Alarm snapshot number, 1-3 can be set 26
Alarm time setting SUN SAT means one week, based on the count of day ; 0 23 means one day, based on the unit of half an hour 2.9.5 Network setting Network setting Input network parameters RTSP port set RTSP port or choose RTSP permission verify ONVIF Setati parametrii ONVIF set relevant parameters of ONVIF; ONVIF on or off, ONVIF port, Time zone setting, image parameter settings, and so on 27
2.9.6 microsd card Start plan of record: start timing record stream type: record stream, main stream and sub stream optional record length: 15-900 seconds can set, default is 600 seconds format SD card: can format SD card recording time can be set; it is recording time that show green on the right 2.9.7 Timing snapshot Tick save pictures to SD card, SD card time interval is 60 seconds, it means snapshot a picture saved to SD Card every 60 seconds Tick save pictures to FTP server, FTP time interval is 60 seconds, it means snapshot a picture saved to FTP server every 60 seconds 2.9.8 PTZ Can set protocol code, PTZ protocol, PTZ speed, Baud rate, date bits, stop bits, verify and other functions Note: only some cameras support PTZ setting function 28
2.9.9 Login information You can modify password of the device 2.9.10 System Synchronization with network time; Set NTP server, sync time interval, time zone, etc. device information can obtain current information of the device; including device name, software version, IP address, MAC address, etc. ; can restart the device and restore to factory default setting 2.9.11 WiFi Step 1: Select enable WIFI, click search WIFI signal Step 2: Double-click the SSID of WIFI using Step 3: Input WIFI password key Step 4: Click setting button, when prompt set up successfully, clicking check WIFI, after prompt set up successfully then unplug the net cable 29
2.10 User management The factory default administrator user of the device is admin, password is empty. After log in by administrator, he can add user, delete user and set user permission. User permission has three types: admin, user, guest. Click Config Click User management From this interface you can add users, delete or change permissions or change user password. 2.11 Other settings [Connection timeout] connection time can set 5-60seconds [Log retention time] IIt has a month, two months, three months, six months four options, the CMS logs in the set period of time can not be deleted [Snapshot format] It refers to the format that CMS snapshot pictures, snapshot format: JPG and BMP available [Image snapshot path] It refers to the saving path that CMS snapshot pictures [Booting the system automatically run program] cwhen start Windows, it uploads monitoring software automatically. If you don't choose it, program doesn't start. [Single screen number] It can set maximum number of single screen: 16 pictures, 25 pictures, 36 pictures (need to restart the software to work) 30
[Password] can set default password when adding device [Export parameters] Export all set parameters from CMS (backup all configuration parameters) [Import parameters] import all exported setting parameters to another CMS, restore all configuration parameters (the version of two CMS must keep the same, otherwise it may occur exception.) [Rebuild video index] Delete the video database index file, rebuild video database index file 2.12 Log [All logs] IRecord all information of system [System log] Record the user login, exit, and user configuration, etc [Operation log] Record all operation information from users [Alarm log] Record device alarm information 31